Heatflo Sealants Ltd

Brand & Trade Names

• Adhaesium Machine Mounting Compound ADHAESIUM - MACHINE MOUNTING COMPOUND A unique water based adhesive mounting system, which does not rely on bolting and grouting reducing installation time. Typically applied to concrete and used without damage to floor slab integrity. Designed for use to secure medium and heavy machinery such as lathes, presses and punches. Equipment secured with Adhaesium can be easily removed and re-sited without damage to either the floor or machine base. A maximum continuous operating temperature of >1000ºC.
• AL/CS 2 -Part Chemical Set Adhesive AL/CS 2-PART CHEMICAL SETTING CEMENT ADHESIVE (FILLER/BINDER) 2-Part Filler/Binder system, which forms an Alumina based ceramic adhesive/cement. Water based. Chemical setting action.designed for bonding, assembling, sealing, jointing or repairing glass, ceramics, metals, quartz. Possesses excellent thermal, electrical and mechanical properties. A maximum continuous operating temperature of >1400ºC. Suitable for Bonding, Thin Films/Coatings, Thick Sections and Potting/ Encapsulation. Typically Used For: Elements: Ovens: Hot Plates: Encapsulating: Potting/Embedding: Heaters, Elements and Resistors. Mixing Ratio: 1 Filler / 1 Binder, by weight.
• Autostic High Temperature Adhesive AUTOSTIC FC & FS SERIES Autostic is ideal for bonding, assembling, sealing, jointing or repairing glass, ceramics, metals, quartz, steatite etc. It can be applied by spray, cartridge or trowel and has a maximum continuous working temperature of >+1000°C. FC4 for use with spray or dipping application (1000 MPa). FC6 for use with brush or spreader (1400 MPa). FC8 for use with trowel or cartridge gun application (3000 MPa). FC9 for cartridge gun application (3500 MPa). Typical Applications: Elements : Fire Doors: Glazing Bars: Heaters: Hot Plates: Resistors: Ovens: Thermocouples
• Ceramix T C Caulking Compound CERAMIX T.C.CAULKING COMPOUND .A water based Thixotropic Ceramic Adhesive/ Sealing Compound. .Designed for use where a high temperature rigid seal or adhesion is required. .Available in two grades; Ceramix TC Caulking and Ceramix TC Caulking Modified (slightly less viscous for use when porous materials are bonded). .Can be used safely as an adhesive or sealant where resistance to the spread of flame is required. .A maximum continuous operating temperature of 1250ºC. .Available either in a cartridge to suit most application requirements. .Suitable for Thin films/ Coating and Bonding. .Maximum Continuous Service Temperature: 1250°C. .Available in white or black. .Ready to use .Sets to form hard and rigid ceramic mass which is resistant to thermal shock and age. Typically Used For: .Adhesive - Bonding ceramics, glass, metals, concrete, stone, silicate fibre materials and many other surfaces. .Sealant - High temperature rigid seals for flues, stoves and other heating devices. .Fire protection applications
• Fiborclad High Temperature Adhesive FIBORCLAD HIGH TEMPERATURE ADHESIVE A water based Thixotropic Inorganic Adhesive. Designed for bonding and jointing all types of inorganic wall boards. Complies with BS 476: Part 4: Non combustibility test form materials. Can be used safely as an adhesive where resistance to the spread of flame is required A maximum continuous operating temperature of 850ºC. Available in a range of viscosities: Grade 3 - Low viscosity, Grade 4, Medium viscosities and Grade 7,9 - Higher viscosity. Suitable for Thin films/ Coating and Bonding. Bonds inorganic wallboards, ceramics, glass, metals, concrete, stone, silicate fibre materials. Used for fire protection applications where fire reistance is an important factor.
• Firebrand Fire Cement FIREBRAND FIRE CEMENT A water based adhesive fire cement, manufactured to a stiffer consistency. Designed for use in the assembly and installation of gas/multifuel heating appliances. Odourless and non-toxic. A maximum continuous operating temperature of 1400ºC. Available as a neutral brown or black putty. Ready to use. Sets to form hard and rigid ceramic mass which is resistant to thermal shock and age. Excellent storage life. Used for the installation of fireplaces and hearths. Seals joints on flues, stoves and other heating devices. Full range of sizes: 300ml, 500g, 1Kg, 2Kg, 3Kg, 5Kg, 10Kg, 25Kg.
• Fireproof Screed / Mortar Temperature resistant to 1400°C. Ideal for screeding or rendering over brick, block and stonework in fireplaces or chimneys. Can be used to manufacture pre-cast firebricks for stoves and room heaters. Uuse internally or externally. Colour: Grey
• Flexseal 300 Silicone HT FLEXSEAL 300 - RTV SILCONE SEALANT A cartridge applied High Temperature Resistant RTV Silicone based sealant/adhesive. Designed for use where a flexible bond is required together with high temperature resistance. Non-slump paste. Excellent adhesion between most substrates. Suitable for gap filling applications and jointing materials of different thermal expansions. Maximum continuous operating temperature of 300ºC. Available as a white or black paste. Resistant to weathering and ageing - can be used externally. Ready to use. Typically Used For: Flues: Ducting: Electrical Insulation: Fixing Ceramic Rope: Gasketing: Jointing Metals, glass, Ceramics
• Flexseal 350 High Temperature Silicone HT FLEXSEAL 350 - RTV SILCONE SEALANT A cartridge applied High Temperature Resistant RTV Silicone based sealant/adhesive. Designed for use where a flexible bond is required together with high temperature resistance. Non-slump paste. Excellent adhesion between most substrates. Suitable for gap filling applications and jointing materials of different thermal expansions. Maximum continuous operating temperature of 350ºC. Available as a red paste. Resistant to weathering and ageing - can be used externally. Ready to use. Typically Used For: Flues: Ducting: Electrical Insulation: Fixing Ceramic Rope: Gasketing: Jointing Metals, glass, Ceramics
• Fortafix high temp resistant adhesive, scements and sealants, water based products
• Light / Medium / Heavy Grade Adhesive LIGHT / MEDIUM / HIGH GRADE HIGH TEMPERATURE ADHESIVE (ALL GRADES) Ready to use dense water based Ceramic Adhesive paste. Designed for bonding, jointing or repairing glass, ceramics, metals, quartz and steatite. Excellent adhesive, thermal, electrical and mechanical properties. Available in three viscosities - Heavy, Medium and Light Grades. Operating temperatures 950ºC, 1000ºC, 1200ºC. Typically Used For .Elements.Heaters.Hot Plates . Resistors.Ovens.Thermocouples Heavy Grade - For use for sealing and gap filling applications where little or no porosity is evident in substrates. Medium Grade - General purpose high temperature adhesive. Light Grade - For use when porous materials are bonded or when a consistency more fluid than Medium Grade is required. Principal Characteristics .Suitable for Thin films/ Coating and Bonding. .Maximum Continuous Service Temperature: >1000°C (depending on Grade). .Available as a white paste. .Ready to use. .Sets to form hard and rigid ceramic mass which is resistant to thermal shock and age.
• LQ/S6 2-Part Chemical Set Adhesive A High temperature resisting cement adhesive 1000ºC.Designed to provide good dielectric strength, low thermal expansion, high tensile and compressive strength. Mixing ratio: 2 Filler / 1 Binder, by weight.
• Rocksett High Temperature Sealant ROCKSETT - HIGH TEMPERATURE THREAD SEALANT A water based high temperature resistant clear thread-locking sealant. Designed for use in threads and cylindrical assemblies operating at high temperatures. A maximum continuous operating temperature of +1000ºC. Suitable for bonding and thin films/coatings Ready to use Typically Used For: Thread-locking: Turbines: Calibrations nuts: Sleeves: Foundry Equipment: Gas ignitor assembly
• Ropefix High Temperature Fixative Adhesive A Clear liquid adhesive. Heat resistant to 700°C. Excellent for attaching mineral fibre rope, tape etc. to metal, glass and most inorganic materials. Used extensively in the heating and ventilation industries. Excellent for fixing fibre rope to stove doors. Sizes: 1L, 125ml tin, 50ml polybottle.
• TEMCEM Fire Cement TEMCEM FIRE CEMENT A water based pliable stiff putty consistency fire cement. C G Templers original formulation. Strong adhesion at all temperatures upto 1400°C. Available in brown or black Designed for use in the assembly and instillation of gas/multifuel heating appliances. Odourless and non-toxic. Maximum continuous operating temperature of 1400ºC. Excellent storage life. Used for the installation of fireplaces and hearths. Seals joints on flues, stoves and other heating devices. Full range of sizes: 500g, 1Kg, 2Kg, 3Kg, 12.5Kg, 25Kg
• VITCAS Heat Resistant Plaster
• VITSET Air Setting Refractory Cement/Mortar Ready Mixed

Products & Services